3D Sublimation Shot Glass

3D Sublimation Shot Glass

3D Sublimation Shot Glass is a small glass designed to hold or measure spirits or liquor, which is either drunk straight from the glass (“a shot”) or poured into a cocktail. You can use  the shot glass surface to create beautiful imagery or the design you want.

Making Process:

• Prepare your 3d shot glass, printed pictures and thermal tapes

• Fix tight the picture and the 3d shot glass with the tapes. Make sure the vacuum printing is connected with power and the right voltage

• Turn on the machine. Then the display reads the date and system time. Press power once, the display changes to the mood of printing time and temperature.

• Press temperature button to set the printing temperature at 280 C. Press time setting button to set the printing time at 4 minutes.

• Press heating button twice, the upper and lower heating board start working together

• Upon the temperature reaching 280, put the shot glass into the box

• Press the timing button, the machine starts countdown.

• When the printing time ends and the machine alarm, take the shot glass out of the box. Warning: Putting on oven gloves or other protective gloves to avoid burning injury.

• Put more printing items into the box for sublimation transfer, or turn off the 3D sublimation vaccum box.